







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose Toto Construction
We provide independent Toto construction and service in Boulder City: diagnosis, repair, installation and remodeling around Toto bathroom fixtures, done by technicians who have up to 13 years of experience and know these products part by part. What separates our work is focus. We aren’t a general handyman outfit that treats a Washlet like any other appliance. We’re an independent Toto service provider, which means we are not authorized, sponsored or endorsed by Toto. We’re simply experts in their products, and we say so plainly. Our estimates are free, quotes are written line-item, and the price is set per job by that written estimate before any work starts. Call (888) 329-9854. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Boulder City Construction for Your Toto Construction?

We service Toto fixtures across the full range, from the original 1960s wall-hung toilets still sitting in some of this town’s older homes to current high-tech Washlet systems. That span matters. Wall-hung and one-piece bowls come apart differently than a standard two-piece toilet, and integrated smart units bring electronics into a room that was never designed for them. Our technicians have worked on enough of these to read the symptoms before they start unscrewing anything.
The other half of trust is parts. We source genuine Toto OEM parts for critical components like control boards, flush valves and seats, because compatibility on those parts is not negotiable. A board that doesn’t match the unit’s logic can behave worse than the failed one you replaced. For less critical items, like supply lines or wax rings, we use high-quality aftermarket parts when they meet or exceed OEM specifications. We also service with the warranty in mind, so we don’t do anything that would give a manufacturer a reason to walk away from a covered unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Boulder City
These are the failures we see most in Toto products, and what usually causes them.
- Washlet control boards and electrical components failing. Power surges and moisture are the usual culprits, and Boulder City’s older homes often have wiring and outlets in a bathroom that weren’t put there for a heated seat and a bidet pump. The symptom shows up as error codes, a bidet function that quits, or the whole unit shutting down.
- Weak flush performance and clogging in Aquia and Vespin dual-flush and one-piece toilets. This is usually mineral buildup in the rim or a worn-out flapper valve, not a design flaw. Our water runs hard, and hard water leaves scale where the flush jets are narrowest.
- Neorest and Washlet seat sensors malfunctioning. Phantom flushing, a lid that stops opening on approach, or no automatic flush at all. Sensor drift and moisture intrusion are the common causes.
- Leaks at the tank-to-bowl gasket or supply line. More common in older Toto toilets, where the rubber has simply degraded with heat and time. A slow leak you don’t notice can quietly damage the floor and subfloor.
- Fill valves that won’t shut off cleanly. The toilet runs in short bursts, then stops, then runs again. It’s often the valve or the flapper seat rather than the whole fill assembly, and it wastes water every day you leave it.
One pattern is specific to this place. Boulder City sits on hard, mineral-heavy water and a lot of our housing stock dates from the 1931-1940s federal reservation era, so the pipes feeding a bathroom are frequently as old as the fixture on top of them. That combination means buildup and pressure issues show up earlier here than they might elsewhere, and it’s why we check the supply side before we blame the toilet.
Toto Parts & Our Repair-vs-Replace Approach

We don’t stock or warehouse Toto parts, and we’re not a Toto dealer, so we’re not going to push you toward a part because it’s already on a shelf. We source genuine Toto OEM parts for critical components like control boards, flush valves and seats. For supply lines, wax rings and similar items, a high-quality aftermarket part is fine when it meets or exceeds OEM specifications.
The repair-or-replace call is one we make honestly. If the repair cost on a Toto unit comes out to more than half the price of a new one, and the existing unit is over 10 years old, replacement is usually the better investment. Below that line, repair it. A good example is the Washlet seat that suddenly stops heating and quits spraying, often traced to a failed control board or a blown fuse after a power surge. A qualified technician checks the power supply and the error codes, replaces the faulty board, or recommends a new Washlet unit when the repair cost approaches the price of a new one. Either way, the toilet ends up functional and safe. If you’re weighing that decision right now, call (888) 329-9854 for a free estimate.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We ask what the unit is doing and when it started, then check power supply, water supply and error codes on electronic fixtures. On Aquia and Vespin toilets we test flush volume and look for rim buildup before assuming the valve is bad.
- 2
Written quote. You get a line-item estimate before we touch anything. The price is set per job, and the written estimate sets the final price. No change orders added after the fact.
- 3
Repair or install. Genuine Toto OEM parts on critical components. Correct mounting on wall-hung models, correct sealing at the gasket and supply line, and clean work in tight historic-district bathrooms where there’s very little room to move.
- 4
Test. We run the flush cycle, cycle the Washlet functions, check for leaks at every connection and confirm no error codes return. Nothing gets signed off until the fixture behaves the way it should.
- 5
Warranty conversation. We tell you what was done, what part was used, and what that means for any remaining coverage on the unit, so there’s no confusion later.
Toto Products We Service & Install in Boulder City
We work on the Toto product range as it actually appears in Boulder City homes, including the original wall-hung toilets from the 1960s, Washlet systems from entry-level models like the C100 through the C200 and S550e, and integrated Neorest smart toilets. On the dual-flush and one-piece side, the Aquia and Vespin lines come up often. We also service EcoPower and EcoPromenade sensor faucets and flush valves, including the electronics that make them work. Beyond the fixture itself, we handle the room around it: bathroom remodeling, walk-in shower installation, and bathroom vanity installation, so the Toto product you’re investing in sits in a bathroom built to support it. If your existing toilet is a standard model and you’re considering a Washlet seat upgrade, that’s a common path we install.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Toto isn’t the only name we know, and that matters when a bathroom remodel spans more than a toilet. Cabinetry from KraftMaid, fixtures from Kohler, roofing from GAF, and windows and doors from PGT all fall within our regular work. You get one contractor handling the full scope instead of coordinating three. If your project touches more than the Toto unit, we can carry it.
FAQs – Toto Construction Service in Boulder City

No. We are an independent Toto service provider and are not authorized, sponsored or endorsed by Toto. We work on Toto products because we know them well, not because the manufacturer has certified us. Call (888) 329-9854 for a free estimate.
Yes, with a clear split. Genuine Toto OEM parts go into critical components like control boards, flush valves and seats. High-quality aftermarket parts are used for items like supply lines and wax rings when they meet or exceed OEM specifications. Call (888) 329-9854 to talk through your specific fixture.
Simple repairs like a flapper valve, supply line or seat sensor are usually a single visit. Control board replacement and Washlet work can run longer because diagnosis and testing take time. Bathroom remodels that include Toto fixtures run days to weeks depending on scope, and we won’t promise a timeline we can’t hold. Call (888) 329-9854 for a real schedule based on your job.
Wall-hung toilets, Washlet systems including the C100, C200 and S550e, Aquia and Vespin dual-flush and one-piece toilets, Neorest integrated smart toilets, and EcoPower and EcoPromenade sensor faucets and flush valves. We also handle the bathroom remodel work around them. Call (888) 329-9854 for a free estimate.
Proper service with correct parts shouldn’t void a warranty, but the manufacturer’s terms control and we don’t speak for Toto. We service with the warranty in mind and use genuine OEM parts on critical components to keep coverage intact. Call (888) 329-9854 and we’ll walk through what applies to your unit.
A beeping Washlet that won’t spray usually points to a control board fault, a blown fuse, or a moisture problem in the electronics, though it can also be a blocked nozzle or a power supply issue. A technician checks the power supply and error codes first, since that narrows it fast. Call (888) 329-9854 for a free estimate.
In most cases, yes. A Washlet seat installs on a standard Toto bowl and brings heated seat and bidet functions without replacing the whole toilet, though the bathroom needs a nearby power source and the right seat fit for the bowl shape. It’s one of the more cost-effective ways to get smart functions. Call (888) 329-9854 and we’ll confirm fit before you buy.
An Aquia that runs in short bursts is usually a flapper valve that isn’t sealing or a fill valve that won’t shut off cleanly, and hard water accelerates both. Mineral buildup can also hold the seal open. It’s a straightforward repair once the cause is confirmed. Call (888) 329-9854 for a free estimate.
It depends on the repair. If the cost comes out to more than half the price of a new unit and the existing Neorest is over 10 years old, replacement is usually the better investment. Below that, repair it. Call (888) 329-9854 and we’ll quote both paths.
Yes. We install Toto shower valves and trim, and because we handle walk-in shower installation and full bathroom remodeling, the valve and trim go in as part of a finished job rather than a stand-alone swap with the wall left open. Call (888) 329-9854 for a free estimate.
How Much Does Toto Construction Cost in Boulder City?
Typical estimated ranges for the work we do around Toto fixtures in Boulder City are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A repair on the fixture itself is quoted per job after diagnosis. Call (888) 329-9854 for an exact quote. Estimates are free.
Book Your Toto Service in Boulder City, NV
Whether it’s a Washlet that quit spraying, an Aquia that runs at odd hours, or a full bathroom remodel built around a new Toto fixture, we handle it start to finish. Estimates are free and quotes are written line-item. Call (888) 329-9854. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Boulder City Construction.












