







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Boulder City, NV – installation, repair, and full replacement of Belgard paver driveways, paver patios, and retaining wall systems. What sets our Belgard work apart is how we treat the parts you never see: sub-base depth, compaction in lifts, edge restraint pinned into the aggregate, and polymeric sand worked in at the right moisture. Belgard is a hardscape and landscape-wall brand, and we install and service its paver and wall systems as an independent contractor, not as a dealer or authorized agent.
That independence matters here. We can recommend a Belgard system when it’s the right fit and tell you honestly when another hardscape line serves your lot better. We’re not tied to one catalog.
Most of our Belgard work in Boulder City happens inside a city that can’t sprawl. Roughly 97% of the surrounding acreage is federally held – Bureau of Reclamation and National Park Service land around Lake Mead – so construction stays inside the small, mostly built-out 1930s-40s reservation grid. Renovation and hardscape upgrades are the work here, not subdivision tract building.
Call (888) 329-9854 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Boulder City Construction for Your Belgard Construction?

Our technicians have up to 13 years of experience, and the work that experience covers most is hardscape that fails for one of three reasons: shallow base, bad edge restraint, or sand applied over a wet, dusty surface. Those failures look like Belgard problems. They’re installation problems. We know the difference, and we fix the cause rather than dressing up the symptom.
A Belgard retaining wall is a system, not a stack of blocks. Weston Stone units need proper footing depth, drainage aggregate behind the face, and geogrid where the wall height and soil load call for it. Skip any of those and the wall tells you within a couple of seasons. We build and repair to the system, which is also what keeps a wall inside its warranty terms. Manufacturer warranties typically hinge on proper installation, so we document base prep, restraint, and drainage as part of the job.
On paver work, we use Belgard OEM-compatible edge restraints, caps, and matching units where color and dimension continuity matter, and quality aftermarket polymeric sand and geotextile where performance matters more than the label. Quality parts that fit Belgard systems, chosen for the job at hand.
One contractor, every phase. We handle the driveway, the patio, the fence line, and the house behind it – cabinets from KraftMaid, fixtures from Kohler, roofing materials from GAF, windows and doors from PGT – under one contract and one point of contact. No finger-pointing between subs when the hardscape meets the house.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Boulder City
These are the problems we see most on Belgard paver and wall systems around Boulder City, and what actually causes them.
- Joint sand washout and weeds on patios and driveways. Polymeric sand applied to a wet or dirty surface, or over a base that wasn’t compacted in lifts, never locks in. Water finds the low corner, carries sand out, and weed seed moves into the gap. The fix is rarely more sand on top; it’s correcting the base and restraint, then re-sanding at the right moisture.
- Edge restraint failure and field spread. When the border course isn’t pinned into the sub-base, the paver field creeps outward. You get widening joints, spalling along the border, and raveled joints at the driveway apron where tire load is heaviest. Re-pinning the restraint and resetting the affected course stops it.
- Efflorescence and salt bloom on concrete pavers. Fine white streaking across the surface is mineral salt migrating up as moisture evaporates. In arid Southern Nevada, irrigation runoff and mineral-heavy water sitting on the pavers feed it. Managing drainage and irrigation overspray does more than repeated washing ever will.
- Retaining wall settlement and face rotation. Weston Stone walls built without geogrid, drainage aggregate, or adequate footing depth lean and rotate. Water pressure behind an undrained wall moves blocks that were set correctly the day they went in. Realignment handles minor movement; walls rotated past realignment need rebuilding with drainage and reinforcement.
- Base failure under heat and flash-flood runoff. Boulder City’s high-desert climate brings 100°F+ summers, intense UV, and sudden monsoon-season bursts that sheet water off the surrounding hills. A shallow base that passes in milder ground won’t survive that runoff pattern. Grading and robust drainage around the hardscape are part of the job, not an add-on.
A Belgard paver driveway or patio often shows the same pattern: joints open up, sand washes out at the low corner, and a few border units loosen within a couple of seasons. The usual cause is a base that was too shallow or never compacted in lifts, combined with an edge restraint that wasn’t pinned into the sub-base. A qualified local pro typically pulls the affected field, re-establishes a compacted aggregate base, resets the units on proper bedding, re-pins the edge restraint, and re-sands with polymeric sand at the correct moisture.
Digging here adds its own wrinkle. Crews routinely hit caliche and calcrete hardpan when excavating footings and utility trenches. That dense desert layer means excavation often needs different – and slower, costlier – methods than the softer ground contractors assume elsewhere in the Vegas Valley. We price for what Boulder City ground actually does.
Belgard Parts & Our Repair-vs-Replace Approach

We don’t stock or carry OEM or genuine Belgard parts, and we’re not a Belgard dealer. What we do is source quality parts and units that fit Belgard equipment correctly, and we tell you plainly which ones you’re getting.
Repair rather than replace when the base is sound and the problem is isolated to sand, restraint, or a single course. A washed-out patio with intact base and firm units gets re-sanded, re-pinned, and reset – a fraction of rebuild cost. Full rebuild is warranted when the sub-base has failed or wall blocks have rotated past realignment. Once the aggregate under a paver field is compromised, patching the surface just buys you one more season of the same problem.
For retaining walls, settlement without rotation is often a drainage fix; settlement with face rotation usually means the wall comes down and goes back with geogrid and drainage aggregate. We’ll show you what we find before we recommend either path.
Call (888) 329-9854 for a written, line-item estimate on your Belgard repair or replacement – estimates are free.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the paver field or wall and check base depth, compaction, edge restraint, drainage, and joint condition. On wall work, we look at footing depth and what’s happening behind the face. You get a written finding, not a sales pitch.
- 2
Repair or install. We re-establish compacted aggregate base where needed, reset units on proper bedding, re-pin restraint, and set geogrid and drainage aggregate on walls. New Belgard installation follows the same sequence from bare sub-grade up.
- 3
Test and verify. Joints are checked for lock, the field for surface variation, and drainage for flow away from the house and toward the intended outfall. On walls, we confirm alignment and that drainage aggregate is clear.
- 4
Warranty conversation. We document the work – base prep, restraint, drainage, and materials – so you have a record. That record supports the manufacturer warranty on Belgard units and our own workmanship warranty on the installation.
Permitting runs through a small city building department, and the historic district has its own design review. We pull the permits and pass the inspections the job requires, and we plan scheduling around early-morning concrete pours because summer heat doesn’t negotiate.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Boulder City

We install and service Belgard paver driveways, paver patios, and retaining wall systems, including Mega-Arbel pavers, Catalina slab pavers, Weston Stone retaining wall blocks, and Bristol Valley pavers. That covers new installation, repair of settled or spreading fields, edge restraint correction, joint sand replacement, efflorescence treatment, and wall realignment or rebuild.
We install these systems alongside other hardscape lines – Unilock, Techo-Bloc, and Cambridge Pavers – so the recommendation reflects your lot, your grade, and your drainage rather than one manufacturer’s catalog.
We Also Service These Brands
Belgard is one line in a broader toolkit. We work with KraftMaid and Wellborn cabinetry, Kohler, Grohe, Moen, and Toto fixtures, Cambria, Silestone, and Caesarstone surfaces, GAF, CertainTeed, Owens Corning, IKO, and Atlas roofing, and PGT windows and doors, plus prefab ADU systems from Abodu, Dvele, Mighty Buildings, and Plant Prefab. One contractor, every phase – from the roofline to the driveway.
FAQs – Belgard Construction Service in Boulder City
No. We are an independent Belgard service provider. We install, repair, and replace Belgard paver and wall systems, but we are not a Belgard dealer, are not authorized by Belgard, and are not factory-trained or certified by the manufacturer. Call (888) 329-9854 for a free estimate.
Yes. We use Belgard OEM-compatible edge restraints, caps, and matching units where color and dimension continuity matter, and quality aftermarket polymeric sand and geotextile where performance matters more than branding. We don’t claim to stock OEM or genuine Belgard parts, and we’ll tell you exactly what’s going into the job.
Isolated repairs – re-sanding, re-pinning restraint, resetting a course – usually finish in a day. A full paver field rebuild or a retaining wall rebuild typically runs longer, and we give you the schedule in the written estimate before work starts. Call (888) 329-9854 and we’ll talk through your job.
Pavers and wall systems: paver driveways, paver patios, and retaining walls, including Mega-Arbel pavers, Catalina slab pavers, Weston Stone retaining wall blocks, and Bristol Valley pavers. We install new systems and repair existing ones, from joint sand to full rebuilds.
Manufacturer warranties generally hinge on proper installation, and our repairs follow the same base-prep, restraint, and drainage standards the system calls for. We document what we do so you have a record. We can’t make a manufacturer’s warranty decision for you – check the terms you received – but the work is done to support it.
Typical estimated ranges here are below. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (888) 329-9854 for an exact quote – estimates are free.
Book Your Belgard Service in Boulder City, NV
If you’re pricing a Belgard paver driveway, a patio, or a retaining wall repair in Boulder City, start with a free written estimate. We’ll diagnose the base, restraint, and drainage, then tell you honestly whether it’s a repair or a rebuild.
Call (888) 329-9854. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Boulder City Construction.












