







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Boulder City, and we do it as an independent shop, not a dealer or a factory representative. What sets our KraftMaid work apart is that we diagnose cabinets at the hinge, box, and finish level instead of treating them like a generic box. We aren’t affiliated with or authorized by KraftMaid, so our only loyalty is to getting your kitchen right. Our technicians have up to 13 years of experience with cabinetry installation and repair, and we bring that to every Boulder City kitchen we touch.
Boulder City is a different kind of construction market. Roughly 97% of the land around the city is federally held by the Bureau of Reclamation and the National Park Service, so there’s almost no room to build outward. Builders and remodelers work inside a small, mostly-built-out federal reservation grid set down in the 1930s and 1940s. That means most of the work here is renovation, addition, and careful repair, not new subdivisions. When a KraftMaid kitchen in Boulder City needs attention, it’s usually inside one of those original bungalows or a mid-century ranch, which changes how a job gets scoped. Call (888) 329-9854 to schedule a free estimate.
Why Trust Boulder City Construction for Your KraftMaid Construction?

Our technicians work with KraftMaid cabinetry often enough to know its construction quirks. That familiarity matters more than a badge. KraftMaid boxes are assembled a certain way, doors hang on specific hinge patterns, and drawer glides mount at known spacings. When we open a cabinet and see a pulled hinge, we can narrow the cause to swollen particleboard around the fastener versus a frame that’s separated versus a glide that’s simply worn out. That saves guesswork and protects the rest of the cabinet.
We use quality parts that fit KraftMaid equipment. For hinges, glides, and touch-up finishes, that can mean OEM KraftMaid components when the boxes are sound. For out-of-production doors or discontinued hardware, we source aftermarket equivalents that match the mounting pattern instead of forcing a reface that doesn’t align. We’re an independent shop, not factory-trained or certified by KraftMaid, and we say so plainly because it’s the truth.
Warranty-safe service is part of the plan. We do the work in a way that keeps the cabinet’s structural integrity intact, and we don’t remove or alter components in ways that would compromise a manufacturer warranty. Where a repair could affect your coverage, we’ll tell you before we start. If you’re in an original 1930s or 1940s Boulder City home with a cabinet that’s backed against an exterior wall, that detail matters, because those walls see bigger seasonal swings than interior partitions.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Boulder City
The failures we see on KraftMaid cabinetry follow patterns. Here’s what they look like and why they happen.
- Face-frame and door-joint separation on Captiva and Sonoma doors. Over time, seasonal humidity swings pull at the joints where the door stiles and rails meet. It shows up worst where cabinets back up to exterior walls, because that surface takes the brunt of the swing. The door starts to look out of square before the wood actually fails.
- Particleboard or MDF box swelling and hinge screw pull-out. The sides of base cabinets near dishwashers and sinks are the usual suspects. A slow supply-line leak or a dishwasher that weeps once a month soaks into the panel, the panel swells, and the hinge screws lose their bite. You’ll notice the door sagging before you notice the leak.
- Drawer glide failure and cracked drawer-box corners on ProSeries and Simplicity lines. These lines take real weight in daily use. When overloading is combined with age, the glide bearings wear unevenly and the drawer-box corners can crack. The drawer still pulls, but it drags, squeaks, or drops on one side.
- Finish wear and edge peeling on painted or glazed door fronts. High-touch areas like the ends of an island and the surround of the refrigerator take the most contact. Painted and glazed finishes wear at the edges first, where the coating is thinnest, then peel back from there.
- Misaligned doors and drawers after a humid summer. A house that bakes in the high-desert Mojave heat and then swings through monsoon humidity puts cabinetry through a cycle most kitchens don’t see. Doors that sat flush in spring can sit proud by late summer, especially on older Captiva and Sonoma frames that have already absorbed and released moisture a few hundred times.
Here’s the detail you won’t find on the manufacturer’s page: in Boulder City’s dry high desert, the failure rarely starts with excess moisture in the air. It starts with a slow water leak under the sink or beside the dishwasher that dries out between uses and never gets fully dried inside the panel. By the time the door sags, the particleboard has been swelling and shrinking in place for months. That’s why we check the box before we ever touch the hinge.
KraftMaid Parts & Our Repair-vs-Replace Approach

Choosing the right part is half the job. For KraftMaid cabinetry, we use OEM hinges, drawer glides, and touch-up finishes when the cabinet boxes are sound. We don’t stock or carry genuine KraftMaid parts, but we can specify and source what fits your cabinet. For out-of-production doors or discontinued hardware, we source quality aftermarket equivalents that match the mounting pattern rather than forcing a reface that doesn’t line up. The goal is a repair that looks and functions like the cabinet was built for it, because it was.
Repair versus replace is a real decision, and we won’t sell you a replacement when a repair is honest. Repair makes sense when the boxes and frames are solid, the hardware failure is localized, and the finish can be brought back. Full replacement is the honest call when swelling, delamination, or multiple failed hinge locations show the cabinet has lost structural integrity. Two failed hinges in one cabinet side usually means the panel itself is gone, and re-seating screws in it is a temporary fix. Call (888) 329-9854 and we’ll give you a straight read on which side of that line your cabinets are on. Estimates are free.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the doors, pull the drawers, and check the box panels for swelling, delamination, and prior repairs. On Captiva and Sonoma doors we look at the joint lines for separation, and on ProSeries and Simplicity lines we test the glide travel and inspect the drawer-box corners. We trace any moisture to its source before we do anything else.
- 2
Repair or install. If the cabinet box is salvageable, we dry and stabilize the area, then re-seat hinges with proper inserts or replace the affected cabinet and rehang the doors. For installations, we set the boxes level and plumb and check door reveal and drawer alignment before we call it done.
- 3
Test. Every door opens and closes through its full swing. Every drawer pulls through its full extension. We check the reveal line across the door fronts and confirm the glides carry weight without sag. If a hinge needs a quarter-turn of adjustment, we make it now.
- 4
Warranty conversation. We walk through what was repaired, what was replaced, and how the work relates to your KraftMaid coverage. If your finish or hardware has a manufacturer claim in it, we’ll tell you which path protects it.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Boulder City

We service and install KraftMaid cabinetry across the kitchen and bath, and the lines we see most are Captiva, Sonoma, ProSeries, and Simplicity. On the install side, we handle cabinet installation and refacing, full kitchen remodeling, and small or partial kitchen remodels. On the service side, we re-seat hinges, replace drawer glides, rehang doors, repair finish and edge wear, and swap out damaged boxes where the frame still holds. If a cabinet is beyond repair, we can spec a KraftMaid replacement or walk you through an upgrade. You choose the surface; we handle everything else.
For larger scopes, we also spec countertops from Cambria, Caesarstone, and Silestone, and fixtures from Kohler, Moen, and Grohe, so a Boulder City kitchen remodel flows from cabinets to surfaces in one scope.
We Also Service These Brands
KraftMaid is one brand in a deep roster. We’re a single-source contractor for 50+ manufacturer brands across every trade we perform, from GAF roofing to PGT windows to Master Halco fencing to Kohler fixtures. That range means we can coordinate the whole project, roofline to driveway, under one contract and one point of contact. No finger-pointing between subs.
FAQs – KraftMaid Construction Service in Boulder City
No. We’re an independent KraftMaid service provider in Boulder City. We’re not a KraftMaid dealer, not factory-trained, and not certified by the manufacturer. That independence lets us recommend the right compatible part or a strategic upgrade without pushing a manufacturer’s agenda. Call (888) 329-9854 for a free estimate.
Yes. We use OEM KraftMaid hinges, drawer glides, and touch-up finishes when the boxes are sound, and quality aftermarket equivalents that match the mounting pattern when hardware is out of production. We don’t stock or carry genuine KraftMaid parts, but we can specify and source what fits your cabinet. Call (888) 329-9854 to talk through your cabinet.
Most single-cabinet repairs take a short visit, while a full cabinet installation or kitchen remodel runs days to weeks depending on scope. Everything in Boulder City is set per job by the written estimate, so you’ll know the timeline before work starts. Call (888) 329-9854 for an exact quote. Estimates are free.
We cover KraftMaid kitchen and bath cabinetry, including Captiva, Sonoma, ProSeries, and Simplicity lines. That means hinges, glides, doors, drawer fronts, box repair, finish touch-up, refacing, and full or partial kitchen remodels. We’ll confirm what fits your cabinets when we see them. Call (888) 329-9854 to book.
Warranty-safe service is part of how we work. We do the work in a way that keeps the cabinet’s structural integrity intact and doesn’t alter components in ways that would compromise your manufacturer coverage. Where a repair could affect it, we tell you before we start. Call (888) 329-9854 with your cabinet details.
Typical estimates for KraftMaid work in Boulder City run from $800 for a backsplash up to $45,000 for a full kitchen remodel. The written estimate sets the final price. Call (888) 329-9854 for an exact quote. Estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4000 – $13000 |
| Small Kitchen Remodel | $9000 – $20000 |
| Kitchen Remodel | $14000 – $45000 |
| Countertop Installation | $2000 – $6500 |
| Backsplash Installation | $800 – $2500 |
| Kitchen Island Installation | $3000 – $10000 |
Sometimes it can be repaired and sometimes it can’t, and the deciding factor is whether the box has kept its structural integrity. If the swelling is localized and the panel hasn’t delaminated, we can dry and stabilize the area and re-seat hinges with proper inserts. If multiple hinge locations have failed or the panel is delaminating, replacement is the honest call. A typical KraftMaid kitchen call starts with doors that no longer sit flush and hinges that have pulled loose after years of humidity cycling; the usual cause is particleboard swelling around the hinge screws, often traced to a slow supply-line or dishwasher leak that was never fully dried. A qualified local pro will confirm the box is salvageable, dry and stabilize the area, then re-seat hinges with proper inserts or replace the affected cabinet and rehang doors, and will flag when the damage pattern means refacing or full replacement is the better spend. Call (888) 329-9854 and we’ll give you a straight read.
They can separate at the door joints over time, especially where the cabinet backs up to an exterior wall. Seasonal humidity swings pull at the stiles and rails, and the door starts to look out of square before the wood actually fails. The fix depends on how far the joint has opened: some doors can be re-clamped and re-glued, and others need replacement if the joint has fully failed. Call (888) 329-9854 for a free estimate on your doors.
Often yes, through aftermarket equivalents that match the mounting pattern. We don’t force a reface when it doesn’t align, and we don’t claim to stock discontinued KraftMaid parts. What we can do is source a quality match that fits your cabinet’s hinge and drawer geometry. Call (888) 329-9854 with your cabinet details and we’ll confirm what’s possible.
Glide failure usually comes from overloading combined with age, and it shows up as a drawer that drags, squeaks, or drops on one side. On ProSeries and Simplicity lines, cracked drawer-box corners can accompany the glide wear. Replacing just the glides is often worth it when the drawer box is intact; if the box corners are cracked, the drawer box needs attention too. Call (888) 329-9854 for a free estimate.
Yes, when the boxes and frames are solid. Finish wear and edge peeling show up first around high-touch areas like island ends and the refrigerator surround, where the coating is thinnest. Refinishing or refacing brings those surfaces back without replacing sound cabinetry. If the wear has gone past the finish into the substrate, we’ll tell you. Call (888) 329-9854 for an exact quote. Estimates are free.
Book Your KraftMaid Service in Boulder City, NV
If your KraftMaid cabinets need attention, we’ll open the doors, check the boxes, and give you a straight answer on repair versus replace. One contractor, every phase. Call (888) 329-9854 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Boulder City Construction.












